SIX NEW RIMS AND WHEELSETS FROM IBIS

Two years ago, Ibis introduced the ultra-wide 41mm 741 and 941 wheels to a few raised eyebrows. Once people rode the wheels and experienced all the benefits, those raised eyebrows quickly became high fives. Elbow pad sales spiked due to the massive traction of the wheels, as lean angles to approached 90^°. OK, we made that part up but you get the idea.

4 In Carbon Fibre

• New Asymmetric Profile Carbon Fiber Rims
• Lower Profile Nets a 30% Increase in Impact Strength
• Less Material Saves 7.5% Weight
• Industry Nine Hubs Machined in USA
• Boost Front and Rear
• SRAM XD or Shimano Drivers
• 27.5" and 29" in 41mm and 35mm Outer Widths
• Wheels Built in USA
• Available May 1, 2016
• Wheelsets $1799

2 In Aluminum

• Asymmetric Profile 6066 Aluminum Rims
• New Super Durable Ibis Hubs
• Work Great with Plus Tires
• Boost Front and Rear
• SRAM XD or Shimano Drivers
• 27.5" and 29" in 38mm Outer and 35mm Inner Widths
• Available May 15, 2016
• Wheelsets $549

With the 742/942, we’ve retained the 41mm outer/35mm inner widths of our 741/941 rims, while increasing impact strength, reducing weight and maintaining all-important lateral stiffness.

The 735/935 feature 35mm outer and 29mm internal rim widths. The 735/935 are ideal for lighter trail bikes that see more XC time, and also great for riders looking to save as much weight as possible, while taking advantages of the features that wide rims bring you.

Our new carbon rim design features a lower cross section height for increased impact performance.  The lower 19.5mm section height makes the wheel better able to distribute the loads of localized impacts from rock strikes or hard landings.

Also, we are introducing a new hybrid carbon fiber layup, strategically combining layers of a new, high-toughness carbon/epoxy prepreg with our original carbon composite, increasing both ultimate strength and impact durability.  This, combined with the asymmetric rim design that features 5mm of offset (2.5mm on 735/935)  allows for higher spoke tensions that are nearly equal from one side of the wheel to the other. As a result of all this, the 742/942 nets a 30% increase in impact strength yet a 7.5% decrease in weight, compared to our previous rims.

Our carbon wheels now come with the excellent Industry Nine Torch hubs. The durable hubs are made in the USA in Industry Nine's Asheville machine shop, and feature a 60t ratchet with 6 out of phase pawls that results in a 3º engagement. They are equipped with Enduro bearings and come with either Shimano or SRAM XD drivers.

A wider rim delivers better sidewall support so in many cases you can run lower pressures in your rubber. Tires mounted on wider rims don’t burp as easily. Lower pressures, even a pound or two, do several beneficial things, including increasing the contact patch, which results in better traction. Running lower pressures on varied terrain actually reduces rolling resistance. Wider rims are stronger and stiffer. With increased traction comes increased braking control.

The 742/942/738/938 rims are ideal for the ultra low pressures (10-18 psi) that we like to run with 2.8 Plus tires (or 18-25psi for 2.25" - 2.5" tires). Running any of our 35mm internal width rims work incredibly well with the new 2.8 Plus rubber we've been riding from Schwalbe and Maxxis. The low system weight of the wheels with these rims and tires combined with the monstrous traction advantage have been a revelation for those who have ridden them.

We've also had great luck with the 3.0 tires on the rims, and our tire manufacturing friends have informed us that there are a lot of new Plus tires in the pipeline.

Wide Rim Benefits

• Dramatically increased traction
• Reduced rolling resistance
• Less tubeless ‘burping’
• Works well with Plus tires up to 3.0"
• Stiffer, stronger wheel
• lighter than most narrow aluminum rims
• Better braking control
• Improved flat protection
• More predictable feel
• You can run a lighter tire with similar durability
• Hookless bead rims are far stronger
• Easy to mount tubeless with just a floor pump

 About Ibis Wheels

Our new carbon wheels feature all the good points about our prior wheelsets, with a few bonus features. The asymmetric design with offset spoke holes allows us to build a wheel with identical spoke lengths on the drive and non-drive side. The spoke tension is evened out between the two sides this way, building a more durable wheel. We are using a new hybrid carbon layup as well, layering a new high-toughness carbon/epoxy prepreg with our original  carbon composite, which increases  both ultimate strength and impact durability. So they are lighter and they are stronger.

Our new carbon wheels come with the excellent Industry Nine Torch Hubs. The hubs are made in the USA in Industry Nine's Asheville machine shop, and feature a 60t ratchet with 6 out of phase pawls that results in a 3º engagement. They are equipped with Enduro bearings and come with either Shimano or SRAM XD drivers.

The 742/942/738/938 rims are ideal for the ultra low pressures (10-18 psi) that we like to run with 2.8 Plus tires. They also do wonderful things to the performance of a number of 2.25” - 2.5” tires that start with fairly rounded profiles. We run lower pressures in 2.25-2.5” tires with the wider rims as well, in the neighborhood of 18-25 psi depending on rider weight and riding conditions.

• 41 mm outside, 35 mm inside width, 27.5” / 650b diameter, carbon fiber
• Industry Nine hubs with 60t ratchet, 6 pawls out of phase. 3º engagement
• 1630g for the set
• rim only 435g
• 32h Hubs | Shimano or SRAM XD driver
• 148 x 12 BOOST Rear | 110 x 15 BOOST Front
• Tubeless Ready, Center Lock Brake Mount
• Sapim CX-Ray Spokes, 5mm spoke offset for a symmetrical build

• 41 mm outside, 35 mm inside width, 29” diameter, carbon fiber
• Industry Nine hubs with 60t ratchet, 6 pawls out of phase. 3º engagement
• 1690g for the set
• rim only 465g
• 32h Hubs | Shimano or SRAM XD driver
• 148 x 12 BOOST Rear | 110 x 15 BOOST Front
• Tubeless Ready, Center Lock Brake Mount
• Sapim CX-Ray Spokes, 2.5mm spoke offset for a symmetrical build

• 35 mm outside, 29 mm inside width, 27.5” / 650b diameter, carbon fiber
• Industry Nine hubs with 60t ratchet, 6 pawls out of phase. 3º engagement
• 1540g for the set
• rim only 390g
• 32h Hubs | Shimano or SRAM XD driver
• 148 x 12 BOOST Rear | 110 x 15 BOOST Front
• Tubeless Ready, Center Lock Brake Mount
• Sapim CX-Ray Spokes, 2.5mm spoke offset for a nearly symmetrical build

• 35 mm outside, 29 mm inside width, 29” diameter, carbon fiber
• Industry Nine hubs with 60t ratchet, 6 pawls out of phase. 3º engagement
• 1590g for the set
• rim only 410g
• 32h Hubs | Shimano or SRAM XD driver
• 148 x 12 BOOST Rear | 110 x 15 BOOST Front
• Tubeless Ready, Center Lock Brake Mount
• Sapim CX-Ray Spokes, 2.5mm spoke offset for a nearly symmetrical build

 IBIS NEW WHEELS

Ibis Announces The 3rd Generation Mojo HD, Longer, Lower, Slacker

Mojo HD Generation 3

The new Mojo HD (HD3 for short) is the third act in the Mojo HD/Mojo HDR trailbike trilogy. Everything is new from the ground-up, notably featuring the latest and greatest refinement of the famed dw-link suspension. Geometry is fully modern: longer, lower and slacker, with 6” of plush rear wheel travel. We’ve built in versatile internal routing and updated the frame design, allowing us to put a water bottle on top of the downtube. We also achieve a drop in weight and pedaling performance on par with the Ripley, so the bike is very fast going up, and scary fast going down.

Features of the Mojo HD

• 650b (27.5") wheels
• The most advanced version of the dw-link suspension on the planet
• 6” of rear wheel travel
• Weight for the frame and shock, size large, matte finish: 5.9 lbs
• 67 degree head angle with a 150mm fork (66.6º with 160 fork)
• Shock specs: Fox Float CTD Adjust Factory Series with Kashima Coat, 7.875" x 2.25", 175lb boost, med velocity, med rebound, LV can, .92in3 volume spacer,
• Optional shock: Cane Creek DBinline
• ISCG 05 compatible with removable adapter
• Threaded bottom bracket
• Super versatile internal cable routing including internal dropper routing.
• Optional polycarbonate down tube cable guard
• Chain stay length: 16.9"
• 12 x 142mm Maxle rear axle
• 160mm post mount left dropout, carbon fiber
• Tapered Head Tube and Steerer
• Up to 2.4" rear tire depending on brand and height of cornering knobs
• Dual row angular contact bearings on the drive side of the lower link that have less play than standard sealed bearings. Preload adjustment is not necessary. Large 28mm x 15mm x 7mm radial bearings on the non drive side for stiffness and long wear
• Bottom Bracket height 13.4"
• Removable direct mount front derailleur mount for a clean 1X look

IBI MOJO HD3 INFO HERE

Ibis HDR Announced

The Mojo HDR continues in the very capable footsteps of our popular and highly regarded Mojo HD, taking its technology and versatility a few steps further. The "HDR" and the "HD" feature identical travel (160mm), the same suspension (the incomparable dw-link), and the same proven geometry.

The HDR adds even more diversity to its menu.

You're currently looking at the 26" wheel 160mm travel version of the bike. You can set it up with 160mm or 180mm front forks.

Over on this page, you can see the HDR 650b, featuring 27.5" wheels (that's why we called it the HDR 650b) and a ton of ways to set it up.

Maybe the best place to start would be the galleries tab, where we've got a few videos showing the bike in action along with some lovely big studio shots.

Features

• 160mm of rear wheel travel
• dw-link Suspension
• 2014 Fox Float CTD Adjust Factory Series with Kashima Coat, 8.5" x 2.5"
• 26" Wheels
• Weight for the frame and shock, size medium, matte finish: 6.2 lbs (~.1 lb difference between sizes and for painted frame)
• 67.5 degree head angle with a Fox Float 34 160mm fork
• Optional polycarbonate down tube cable guard
• Chain stay length: 17.125"
• 12 x 142mm Maxle rear axle
• 160mm post mount left dropout, carbon fiber
• Tapered Steerer
• Compatible with Chris King InSet 3 headsets.
• If you want to run your current straight 1 1/8" fork, adapters available
• 2.35"-2.55" rear tire depending on brand and height of cornering knobs
• Dual row angular contact bearings in the front of the lower link that have less play than standard sealed bearings. Preload adjustment is not necessary. Large 28mm x 15mm x 7mm radial bearings in the rear for stiffness and long wear
• Fox RC4 coil rear available as an option
• The Bottom Bracket height is 13.8" with 2.3" tires
• Front derailleur (if you use one) and adjustable seatpost housing (if you use one) run along the top tube
• Direct mount front derailleur

As we mentioned in the overview, the Mojo HDR is taking over where the very capable Mojo HD is leaving off. They share travel, geometry and suspension kinematics. There are some differences too.

The "HDR" is slightly lighter than the HD, around .3 -.4 lb (depending on size and color), yet is stronger and of equal stiffness. We've employed a new, more precise molding technique similar to that used in the Mojo SL-R to get the weight down.

By shifting around our linkage locations, we've managed to add ISCG 05 chainguide mounting functionality and dramatically increased the front derailleur compatibility across both the 2X and 3X spectrum. We've also increased clearance for the new 11 speed cogsets.

With some other tweaks to the frame, we've made the frame compatible with Fox's new lighter weight XV air cans on the CTD shocks. We've also added clearance for their new Float X piggy back shock.

But perhaps the biggest change of all is that we've made the HDR a fully functional 650b / 27.5" bike. Like its predecessor the HD whose travel you could set at 140 or 160, the HDR has two travel options. In 160mm mode you use 26" wheels and can have your way with just about any trail. And its climbing prowess in this mode is the reason why it's one of the most popular bikes on the enduro circuit. The standard front travel for the HDR is 160mm, though we have a 180mm offering which those people with larger dangly things between their legs prefer to ride.

With a new set of "Limbo Chips" and a shorter shock (the same on shock on the Mojo SL-R), the bike can be set to 130mm travel mode, and with a set of 650b / 27.5" wheels and a fork, you've got yourself a bona fide 'tweener', not a 26", not a 29". That's called the HDR 650b.

Want more travel in 650b mode? Here's what you do: Set the frame up in the 160 travel mode, and add a 5mm travel reducing spacer in the shock. Deflate the shock to check that your tire won't hit the seat tube at bottom out (tire sizes vary a lot). You'll get 150mm of travel in this mode. 

So the HDR has an exceptionally versatile chassis. One that can be beat pretty hard in all day lift riding (put that 180 fork and a coil shock on those days), or run it in shorter travel mode with 650b wheels for a low and slack medium duty trail bike that will probably still net you a few uphill and downhill KOMs (if you're into that sort of thing).

With 160mm Fork

Nominal Size		Small	Medium	Large	X-Large
Seat Tube Length	A	15" (38.1cm)	17" (43.2cm)	19" (48.3cm)	21" (53.3cm)
Top Tube Length	B	564 (22.2")	587 (23.1")	604.5 (23.8")	625 (24.6")
Head Tube Length	C	94 (3.7")	103 (4")	118 (4.65")	134 (5.28")
Chainstay Length	D	435 (17.1")	435 (17.1")	435 (17.1")	435 (17.1")
Seat Tube Angle	E	71.5°	71.5°	71.5°	71.5°
Head Tube Angle	F	67.5°	67.5°	67.5°	67.5°
Wheelbase	G	1091 (43")	1112 (43.9")	1132 (44.6)	1154 (45.5)
Standover		715 (28")	758 (29.8")	760 (29.9")	770 (30.3")
Stack		566	575	590	605
Reach		365	382	409	412
Trail		100	100	100	100
Sizing Guide (height-inches)		5'0" - 5' 5"	5'4" - 5' 9"	5'9" - 6'2"	6' - 6'6"
Sizing Guide (height-cm)		152 - 165	163 - 175	175 - 188	183 - 198

With 180mm Fork

Nominal Size		Small	Medium	Large	X-Large
Seat Tube Length	A	15" (38.1cm)	17" (43.2cm)	19" (48.3cm)	21" (53.3cm)
Top Tube Length	B	569 (22.4")	589 (23.2")	610 (24")	630 (24.8")
Head Tube Length	C	94 (3.7")	103 (4")	118 (4.65)	134 (5.28")
Chainstay Length	D	435 (17.1")	435 (17.1")	435 (17.1")	435 (17.1")
Seat Tube Angle	E	70°	70°	70°	70°
Head Tube Angle	F	66°	66°	66°	66°
Wheelbase	G	1101 (43.3")	1122 (44.1")	1142 (45")	1164 (45.8")
Standover		722 (28.4")	763 (30")	765 (30.1")	775 (30.5")

Find Out More On The New Ibis HDR!